CDS 4000 Interface Card for CU 40xx
RS 4232
Highlights
- Enables remote control of delegate units in a CDS 4000 system.
Overview
The RS 4232 Interface card is placed inside the central unit to allow the CDS 4000 system to communicate with CDS 4000 commander software on a PC or an AMX/Crestron system. The card has two ports, one (1) RS232 and one (1) RS422 which may be used simultaneously.Specifications
| Specifications | RS 4232 | |
| Interconnections | RS 232 port | Male D-sub DB9, 9600 baud, 8 bits, No parity and one stop bit |
| RS 422 port | Female D-sub DB9, 9600 baud, 8 bits, No parity and one stop bit | |
| Physical | Dimensions (H x W x D) | 0.50 x 3.75 x 2.50 in. (13 x 95 x 64 mm) |
| Unit Weight | 3.20 oz. (91 g) | |
| Shipping Weight | 1.0 lbs (454 g) | |
| Mounting | Inside CU 40xx | |
| Specifications are subject to change without notification | ||
Requirements
-
CU 4010 CDS 4000 Central Control Unit for 100 Conference Units
The Central Control Unit (CU) powers and controls conference units and mixes the audio.
-
EC 4232-02 CDS 4000 D-sub DB9 RS232 Cable w/Handshake 6.6 ft. (2 m)
Connects the CDS 4000 Control Unit with RS 4232 card to a PC or an AMX/Crestron control device.
-
PC 6111 DCS 6000 Mini-PC
Small Windows® personal computer for integration with DCS 6000 systems.
Used With
-
SW 4211 CDS 4000 Commander Software for 1,000 Conference Units
The SW 4211 commander software gives the operator/conference chair remote control over all units in the conference (up to 1,000 units).
-
SW 4210 CDS 4000 Comander Software for 100 Conference Units
The commander software gives the operator/conference chair remote control over all units in the conference (up to 100 units).
-
SW 4220 CDS 4000 Mimic/Synoptic Module for Commander Software
The mimic/synoptic module is geographical layout on a monitor screen showing the physical location of microphone units in a conference room.
None
Support Documents
FAQ
Does the system work with third party control companies such as AMX or Crestron?
Yes, however RS 4232 card is required.
Are there any software applications that I can use with the CDS 4000 system?
Yes, the SW 4210, 4211 and 4220. Features monitoring, microphone control, geographical/mimic display, etc. The software is functional in parallel with other control units such as the MC 4000 and external control systems. Note: The SW 42XX requires an RS 4232 interface card to be inserted into the CU.
