CDS 4000 Central Control Unit for 100 Conference Units
CU 4010
Highlights
- Up to 100 units per CU 4005.
- Two (2) trunk outputs for daisy chain connections (50 per connection).
- “Daisy Chain” loop-through cabling.
- Microphone control via PC, MC 4000, or 3rd party device.
- Different operating modes with request-to-speak queue.
- LCD on central unit for easy set-up.
- Up to 6 open delegate microphones.
- Up to 10 CU 4010 can be linked.
- Conference units are hot swappable.
- 500 maximum conference units per system.
- Audio inputs/outputs.
Overview
The CU 4010 Central Control Unit (CU) powers and controls conference units and mixes the audio. The CU 4010 can control and power up to 100 conference units. System settings such as operating modes (Automatic, FIFO and Manual) are accessible via the menu on the front of the CU.
A PC, MC 4000 or 3rd party control device (AMX/Crestron) can be connected to the Central Control Unit to allow the operator to remotely control conference units. In the event of PC failure, the Central Control Unit will revert to its stand-alone operation mode, enabling the conference to proceed.
Includes
CU 4010 CDS 4000 Central Control Unit for 100 Conference Units19” Rack mount hardware
System installation manual
Line cable
Specifications
| Specifications | CU 4010 | |
| Audio performance | System Frequency Response | 35Hz – 19 kHz |
| THD at Nominal Level | <0.1% | |
| Cross Talk Attenuation | ||
| Dynamic Range | ||
| Signal-to-Noise Ratio | >68 dBA | |
| Audio Input | 130 Hz - 13 kHz | |
| Audio Output 1 | 35 Hz - 19 kHz | |
| Audio Output 2 | 35 Hz - 19 kHz | |
| Controls & Indicators | Power Switch | Mains on/off switch on the front panel |
| LCD | 2 x 20 Character LCD display for status info and configuration | |
| Menu Push Buttons | Three (3) push buttons for menu navigation and selection | |
| Audio Control Push Buttons | Four (4) push buttons for quick microphone and line input volume control | |
| LEDs | ||
| Interconnections | Mains Socket | Euro mains socket with built-in fuse, matching mains cable 5.58 ft. (1.7 m) included. |
| CDS daisy chain connector | Two (2) D-sub DB15 female connectors for connecting a chain of conference units | |
| Audio Inputs | One (1) XLR balanced audio input, Nominal 0 dBm (100mV - 5V) | |
| Audio Outputs | One (1) XLR balanced audio output 0dBm. Configurable for Recorder out, Mix-minus, and Insertion. | |
| One (1) XLR balanced audio output -40dBm. Configurable for Recorder out, Mix-minus, and Insertion. | ||
| Cascading | One (1) male and one (1) female connector to cascade other central units and/or the MC4000 Microphone Control Panel (D-sub DB9) | |
| Serial Ports (Optional) | One (1) D-sub DB9 female RS-232 and one (1) RS-422 D-sub DB9 male serial data connectors for PC, 3rdparty control device connection (RS-232 and RS-422 can be used simultaneously). Requires RS4232 | |
| Power | Supply Voltage | |
| Power Consumption | 360W | |
| Physical | Dimensions (H x W x D) (without brackets) | 3.5 x 18.7 x 12.5 in. (88 x 475 x 317 mm) |
| Color | Black w/silver | |
| Unit Weight | 19.6 lbs. (8.89 kg) | |
| Shipping Weight | 22.0 lbs ( 9.99 kg) | |
| Mounting | Free-standing or mounted in a 19" rack | |
| Capacity | Control | 100 conference units per CU |
| Power | 100 conference units per CU | |
| Maximum extension cable length | 330.0 ft. (100 m) | |
| Total maximum CDS chain length | 660.0 ft. (200m) | |
| Specifications are subject to change without notification | ||
None
Used With
-
DM 4420 P CDS 4000 Delegate Unit for Pluggable Mic
Portable conference delegate unit perfectly suited for meeting rooms or temporary discussion-style meetings.
-
MC 4000 CDS 4000 Microphone Control Panel
The MC 4000 Microphone Control Panel is a cost-effective way to control a CDS 4000 system.
-
CM 4420 P CDS 4000 Chairman Unit for Pluggable Mic
The CM 4420 P is a portable conference chairman unit perfectly suited for meeting rooms or temporary discussion-style meetings.
Accessories
-
CA 4400-100 CDS 4000 Extension Cable 328.1 ft. (100 m)
The Bulk non-terminated cable, designed to be used with the CO 4000 connector set to make custom length extension cables.
-
CO D15 F CDS 4000 D-sub DB15 Female Connector
The D-sub DB15 connectors with screw terminals are used to make extension cables for CDS 4000 units.
-
RS 4232 CDS 4000 Interface Card for CU 40xx
Allows the CDS 4000 system to communicate with CDS 4000 commander software on a PC or an AMX/Crestron system.
-
EC 4000 CDS 4000 Extension Cable Assembly
Designed to connect the central control unit to conference units or to interconnect delegate units when the standard affixed cable is not long enough.
-
CO D15 M CDS 4000 D-sub DB15 Male Connector
The D-sub DB15 connectors with screw terminals are used to make extension cables for CDS 4000 units.
Support Documents
FAQ
What’s the difference between the CU 4005 and the CU 4010?
The CU 4005 allows for one microphone chain with 50 units, the CU 4010 allows for 2 microphone chains of 50 units each for a total of 100 units.
How many conference units can be connected to a single CU 4010?
100.
How far can the daisy chain cabling go?
A single extension cable must not exceed 330 ft. Maximum total cable length is 660 ft.
Can I mix and match different microphone styles with the system?
Yes. You can mix table top units with flush mount units.
Is the cabling proprietary cabling?
Yes.
Does the system work with third party control companies such as AMX or Crestron?
Yes, however RS 4232 card is required.
How can I use CDS 4000 for an Interpretation system?
The CDS 4000 is a discussion system only. The mixed floor channel from the CDS 4000 will need to be connected to a separate Interpretation system.
Is it possible to have the loudspeaker active when a headphone is used on the CDS 4000 unit?
There are no headphone outputs on the CDS 4000 microphone units.
What is the maximum number of chairman's units, which can be connected to CDS 4000 discussion system?
Up to 10 chairman units can be active simultaneously in addition to the 6 possible active delegate units.
Are there any software applications that I can use with the CDS 4000 system?
Yes, the SW 4210, 4211 and 4220, features monitoring, microphone control, geographical/mimic display and database. The software is functional in parallel with other control units such as the MC 4000 and external control systems. Note: The SW 42XX requires an RS 4232 interface card to be inserted into the CU.
