Listen Technologies Corporation

Overview

Specifications

	Specifications	LPT-A104-P
Audio	Frequency Range	60 Hz - 20 kHz
	Nominal Sensitivity	89 dB SPL, 1 W @ 3.3 ft. (1 m)
	Rated Maximum SPL	107 dB, 1 W @ 3.3 ft. (1 m)
	Nominal Impedance	8 ohms
Power	Power Handling	10 - 80 W
Physical	Low-Frequency	6.5 in. (165 mm) Polypropylene, 1 in. (25.4 mm) Coil on Aluminum Former
	High-Frequency	3/4 in. (19 mm) Silk Dome
	Enclosure	Backcan: Formed Steel
		Baffle/Rim: High Impact Polystyrene
	Termination	Removable Locking Connector with Screw-down Terminals. 2 Input Terminals
	Outside Dimensions	8.6 in. x 10.2 in. (219 mm x 260 mm) / 8.03 in. (204 m) Front of ceiling tile to back of can.
	Cutout Size	9 in. (229 mm)
	Depth	7.5 in. (191 kg)
	Weight	7.53 lbs. (3.42 kg)
	Shipping Weight	8 lbs. (3.6 kg)
Specifications are subject to change without notification

Requirements

• 

  LA-394-P 16 AWG Plenum Speaker Cable

  The plenum speaker wire is used with the room module (RM) to connect speakers to the system.

Used With

• 

  LPT-R24 ListenPoint High Powered Room Module (4 Mic Max/ 120 Watts)

  The R24 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide power amplification (120 Watts) for the speakers mounted in the ceiling or on a wall.

• 

  LPT-R4 ListenPoint Room Module (4 Mic Max/ No Power Amp.)

  The R4 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide audio to an existing sound system.

• 

  LPT-R22 ListenPoint High Powered Room Module (2 Mic Max/ 120 Watts)

  The R22 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide power amplification (120 Watts) for the speakers mounted in the ceiling or on a wall.

• 

  LPT-R2 ListenPoint Room Module (2 Mic Max/ No Power Amp.)

  The R2 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide audio to an existing sound system.

• 

  LPT-R14 ListenPoint Powered Room Module (4 Mic Max/ 60 Watts)

  The R14 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide power amplification (60 Watts) for the speakers mounted in the ceiling or on a wall.

• 

  LPT-R12 ListenPoint Powered Room Module (2 Mic Max/ 60 Watts)

  The R12 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide power amplification (60 Watts) for the speakers mounted in the ceiling or on a wall.

None

Support Documents

» INSTALLATION TEMPLATE: LPT-A104-P Speaker Cut-Out

» DATA SHEET: LPT-Ax ListenPoint Speakers

FAQ

Plenum-rated products conform to UL standards, which means that, excluding power supplies, they meet UL 2043 for smoke and heat release in air-handling spaces.