Handheld Microphone
HM 4042

Highlights

  • Illuminated red ring for easy speaker identification, clearly visible even in broadcast lighting.
  • Minimized acoustic feedback through cardioid pattern.
  • No pick-up of mechanical table noise thru proprietary double rubber band capsule suspension.
  • Distortion free pick up of high sound pressure.

Overview

The HM 4042 is a handheld microphone to be used with the CDS 4000 or DCS 6000 conference system in press conferences, auditoriums or other occasions requiring a public microphone. The HM 4042 can be controlled by the on/off switch on the handheld itself or remotely via PC/AMX/Crestron or MC 4000 Control Panel. The low noise condenser back-electret capsule features a cardioid pattern in the entire speech frequency range, maximizing speaker pick-up while minimizing the risk of acoustic feedback. The capsule is mounted in a DIS proprietary dual rubber band suspension isolating it acoustically and mechanically from the rest of the microphone, eliminating all mechanical noises from the table. The unit features a bright red illuminated ring to indicate microphone status and comes with a 6 pin XLR connector to connect to a Conference Microphone Unit for Front Panels ( MU 4040 or MU 604x).

Specifications

 SpecificationsHM 4042
AudioSystem Frequency Response90 Hz – 15 kHz (+- 3dB)
Impedance2kOhms @ 1kHz
Sensitivity -68dB +- 1 dB/ 1 microBar at 1kHz
   
Controls & IndicatorsMicrophone buttonButton to switch the microphone on/off or place it in the request-to-speak queue (depending of conference operating mode) 
Illuminated RingBright Red ring to indicated whether the microphone is on (RED)
   
InterconnectionsConnector6p XLR female
   
PhysicalDimensions (H x W x D)6.30 x 0.90 x 0.90 in. (160 x 23 x 23 mm)
Colorblack
Unit Weight8.00 oz. (204 g)
Shipping Weight1.0 lbs. (454 g)
Specification are subject to change without notice

Requirements

Used With

Accessories

Support Documents

    • None

    Contact Us