Digital IR 8-Channel Transmitter
DT 6008

Highlights

  • High quality stereo audio
  • Up to 8 channels
  • Up to 180 radiators per transmitter
  • Emergency override
  • Headphone jack for monitoring
  • Sensitivity control per audio input

Overview

The DT 6008 Digital Transmitter receives the audio input signals and modulates the digital signal. All system settings such as number of channels, channel quality and modulation frequency between 2 and 8 MHz are set on an LCD menu. There are six (6) BNC outputs to lead the signal to the radiators with RG59 cable.
 
The capacity of the DT 6008 transmitter is eight (8) mono standard quality channels, four (4) stereo standard quality channels, four (4) mono premium quality channels, two (2) stereo premium quality channels or a mix of the above. The audio is inserted via regular unbalanced inputs and there is a headphone jack for monitoring. Two (2) additional audio inputs are available with emergency override for life safety messages.

Includes

DT 6008 Digital IR 8-Channel Transmitter
19” Rack Mount Hardware
System Installation Manual
Line Cable

Specifications

 SpecificationsDT 6008
Audio performanceSystem Frequency Response20 Hz - 10 kHz (Standard quality) / 20 Hz - 20 kHz (Premium quality)
THD at Nominal Level<0.05% @ 1 kHz
Cross Talk Attenuation>80 dB
Dynamic Range>80 dB
Signal-to-Noise Ratio>80 dBA
   
Controls & IndicatorsPower SwitchMains on/off switch on the front panel
LCD2 x 16 Character LCD display for status info and configuration
Menu Push ButtonsOne (1) rotary button for menu navigation and selection
Emergency ContactContact on the back, when closed an emergency override message is broadcast
 
InterconnectionsMains SocketEuro mains socket with built-in fuse, matching mains cable 5.58 ft. (1.7 m) included.
Radiator outputSix (6) BNC female connectors to daisy chain radiators
Master transmitter inputOne (1) BNC female connector to connect master transmitter when in slave mode
Audio InputsEight (8) unbalanced RCA audio inputs
Two (2) balanced XLR audio inputs for emergency override to all channels
   
PowerSupply Voltage90 - 260 VAC
Power Consumption55 W
   
PhysicalDimensions (H x W x D) (without brackets)3.5 x 18.7 x 12.5 in. (87 x 475 x 317 mm)
ColorBlack w/silver
Unit Weight8.8 lbs. (4.00 kg)
Shipping Weight10.0 lbs (4.54 kg)
MountingFree-standing or mounted in a 19" rack
   
CapacityRadiatorsUp to 180
Total Maximum Radiator Cable Lengthapprox. 2,970 ft. (900 m)
 
Specifications are subject to change without notification

None

Used With

Accessories

FAQ

What is the battery life of the receivers?
75 hours with rechargeable batteries and 200 hours with 2 alkaline AA batteries.
 
Is there a floor stand for the RA 6013 and RA 6025 infrared radiator?
Yes, our floor stand LA-337 can be used to mount these radiators.
  
How can I avoid interference between lighting and Digital IR systems?
Our Digital IR system is interference free from lighting equipment and day/sun light.
  
How can I mount an infrared Radiator RA 6013 or RA 6025 to the wall?
Use a Wall mounting bracket WB 6000. The bracket has 4 holes for mounting to the wall. The unit includes a template for accurate positioning.
  
Is it necessary to terminate unused outputs of the Digital IR transmitter or Radiators?
No, not needed. All outputs are terminated automatically.
  
How can I use the Digital IR for an Interpretation system?
In combination with the DCS 6000 system, the Digital IR distribution can be used for distributing the languages provided by the floor and the interpreters. This is accomplished by taking the audio outputs from the AO 600X and routing them to the inputs of the Digital IR system.