Listen Technologies Corporation

Overview

The FC 6121 F Delegate Flush Panel is a cost-effective way to permanently flush mount a microphone, microphone button and priority override button. Made of 2.5 mm black anodized aluminum, the panel is very unobtrusive. The unit enables conference chairs to speak, register a request-to-speak, listen to other speakers and override delegates with the priority button. The unit can either be controlled by the microphone button or remotely by the operator. The unit provides a lockable 3 pin XLR connector for a pluggable microphone (sold separately). Mounting is easy with available screw holes on all four corners of the unit. A single 3.3 ft. (1 m) cable is provided to connect to the under-the-table MU 6040 D/C control box. The panel can be customized to fit your specific application.

Specifications

	Specifications	FC 6121 F
Controls & Indicators	Microphone Button	Dual button with Red/Green illuminating LED; red indicates microphone is active, green indicates request-to-speak
Interconnections	Microphone Connector	Lockable 3 pin XLR female
	Connection to MU 4040/6040 C	3.3 ft. (1 m) cable with D-sub HD15 connector (VGA monitor connector) to connect to the MU 4040/604x control box
Physical	Dimensions (H x W x D)	3.5 x 3.5 x 1.2 in. (90 x 90 x 33 mm)
	Cut Out Dimensions (H x W x D)	2.95 x 2.95 in. (75 x 75 mm), Corners radius .15 in. (4 mm)
	Color	Black
	Unit Weight	3.5 oz. (0.1 kg)
	Shipping Weight	1 lb. (0.1 kg)
	Mounting	Flush mount with four (4) screws (provided)
Specifications are subject to change without notification

Requirements

• 

  MU 6042 D DCS 6000 Dual Delegate Microphone Unit for Flush Panels

  The Dual Microphone Unit is required to connect the FD 6012 F Dual Delegate Flush Panel to the DCS 6000 system.

• 

  MU 4040 CDS 4000 Single Delegate/Chairman Microphone Unit fo Flush Panels

  The Single Delegate/Chairman Microphone Unit is required to connect flush mount panels or 3^rdparty dynamic microphones and/or loudspeakers to the CDS 4000 system.

• 

  MU 6040 D DCS 6000 Single Delegate Microphone Unit for Flush Panels

  The Single Microphone Unit is required to connect flush panels or 3^rd party dynamic microphones and/or loudspeakers to the DCS 6000 system.

Used With

• 

  AO 6008 DCS 6000 8-Channel Analog Output Unit

  The Audio Output Unit outputs eight (8) floor or language channels to IR language distribution systems, RF transmitters, recording and/or web-streaming devices.

• 

  PS 6000 DCS 6000 In-Line Extension Power Supply

  Extension power supply to add four (4) 125W chains to the DCS-LAN.

• 

  CU 6011 DCS 6000 High Power Central Control Unit

  Powers and controls the conference units, mixes the audio, distributes simultaneous interpretation language channels and conducts voting sessions.

• 

  IS 6132 P DCS 6000 32-Channel Interpreter Set for Pluggable Mic

  The 32-Channel Interpreter Set is a fully digital, portable, single-user interpreter desk, fully compliant to international standards. The set features two (2) outgoing A/B channels and four (4) input relay buttons.

• 

  DV 6501 F DCS 6000 3 Button Flush Mount Voting Unit

  Cost-effective way to permanently flush mount yes/no/abstain voting buttons and a chip card reader.

• 

  MU 6040 C DCS 6000 Chairman Microphone Unit for Flush Panels

  The Single Microphone Unit is required to connect flush panels or 3^rd party dynamic microphones and/or loudspeakers to the DCS 6000 system.

• 

  MU 6042 D DCS 6000 Dual Delegate Microphone Unit for Flush Panels

  The Dual Microphone Unit is required to connect the FD 6012 F Dual Delegate Flush Panel to the DCS 6000 system.

• 

  JB 6002 DCS 6000 2 Tap-Out Junction Box

  The Tap-Out Junction Box provides two (2) or four (4) tap-outs from the daisy-chain.

• 

  AO 6004 DCS 6000 4-Channel Analog Output Module

  The Audio Output Unit outputs four (4) floor or language channels to IR language distribution systems, RF transmitters, recording and/or web-streaming devices.

• 

  RP 6004 DCS 6000 Repeater

  Splits one (1) DCS-LAN chain into four (4).

• 

  EX 6010 DCS 6000 Extension Power Supply

  Extension power supply to regenerate the signal.

• 

  CU 6005 DCS 6000 Medium Power Central Control Unit

  Powers and controls the conference units, mixes the audio, distributes simultaneous interpretation language channels and conducts voting sessions.

• 

  CS 6032 FHB1 DCS 6000 Flush Mount Channel Selector

  Compact flush-mounted channel selector that distributes the floor, for assistive listening, as well as the language interpretation channels to seating positions.

• 

  AM 6040 DCS 6000 Ambient Microphone Unit

  The Ambient Microphone Unit is used to connect an ambient microphone (sold separately) to pick up background sound in the conference room.

• 

  MU 6040 D DCS 6000 Single Delegate Microphone Unit for Flush Panels

  The Single Microphone Unit is required to connect flush panels or 3^rd party dynamic microphones and/or loudspeakers to the DCS 6000 system.

• 

  DM 6680 P DCS 6000 Delegate Unit /5 Voting Buttons for Pluggable Mic

  Cost effective solution to compliment the same elegant design of the DC 6990 P touchscreen conference unit.

• 

  JB 6004 DCS 6000 4 Tap-Out Junction Box

  The Tap-Out Junction Box provides two (2) or four (4) tap-outs from the daisy-chain.

Accessories

• 

  GM 6523 Advanced Pluggable Microphone 16 in. (40 cm)

  The microphone is a high performance condenser microphone developed to for the pluggable CDS 4000 and DCS 6000 table top and flush mount units.

• 

  GM 6524 Advanced Pluggable Microphone 20 in. (50 cm)

  The microphone is a high performance condenser microphone developed to for the pluggable CDS 4000 and DCS 6000 table top and flush mount units.

Support Documents

» DATA SHEET: FD 6121 F Delegate Flush Panel w/out Loudspeaker for Pluggable Mic

FAQ

Yes. You can mix table top units with flush mount units.