DCS 6000 Extension Power Supply
EX 6010

Highlights

  • Powers up to 320 additional conference units.
  • Increases system redundancy and reliability.
  • Flexible cabling topology.
  • Cost-effective structured Cat-5e cabling.

Overview

The EX 6010 Extension Power Supply splits one (1) DCS-LAN chain into four (4) chains. The signal is regenerated to extend the maximum cable length and 125 watts is added per port to power additional conferencing units. Because each repeater port is isolated, system redundancy and reliability is improved.

Includes

EX 6010 DCS 6000 Extension Power Supply
19” Rack Mount Hardware
Line Cable

Specifications

SpecificationsEX 6010
InterconnectionsMains SocketEuro mains socket with built-in fuse, matching mains cable (5.58 ft. (1.7 m)) included.
DCS-LANTwo (2) RJ45 ports, screened with auto-termination
DCS-LAN Repeat OutputFour (4) isolated and powered RJ45 ports for connection to additional conference units
   
PowerSupply Voltage100 - 240V, 50 - 60Hz
Power Consumption500W
DCS-LAN System Supply125W/48V max per chain
   
PhysicalDimensions (H x W x D)3.5 x 16.7 x 12.5 in. (88 x 475 x 317 mm)
ColorBlack with Silver
Unit Weight12.1 lbs. (5.49 kg)
Shipping Weight13.0 lbs. (5.90 kg)
MountingFree-standing or mounted in a 19" rack
   
CapacityPower4x Up to 80 MU 6040 flush mount stations
4x Up to 42 DM/CM 60x0 P table top microphones
4x Up to 54 IS 6132 P Interpretation stations
4x Up to 110 CS6032F channel selectors

Requirements

Used With

None

FAQ

How many microphone units can be connected to the CU? 
The total number of units that can be connected is based on cable length, type of CU and the type of unit being connected, but on each output of a CU 6010 you can typically get about 30 to 42 delegate/chairman units, or 20 to 30 flush mount units, or 16 Interpreter Sets. More units can be added with extension power supplies. Contact Listen Technical Support for more information.