Chairman Flush Panel w/out Loudspeaker, w/Fixed Mic 14.2 in. (36 cm)
FC 4011 FHB-4432-GB-100

Highlights

  • Illuminated red ring for easy speaker identification, clearly visible even in broadcast lighting
  • Push-to-talk operation introduces structure to the meeting
  • No pick-up of mechanical table noise through proprietary double rubber band capsule suspension
  • Priority override
  • Elegant, unobtrusive, black units

Overview

The FC 4011 F Chairman Flush Panel is a cost-effective way to permanently flush mount a microphone, microphone button and priority override button. Made of 2.5 mm black anodized aluminum, the panel is very unobtrusive. The unit enables conference chairs to speak, register a request-to-speak and override delegates with the priority button. The unit can either be controlled by the microphone button or remotely by the operator. Mounting is easy with available screw holes on all four corners of the unit. A single 3.3 ft. (1 m) cable is provided to connect to the under-the-table MU 4040 (CDS 4000) or MU 6040 C (DCS 6000) control box. The panel can be customized to fit your specific application.

Includes

FC 4011 F Chairman Flush Panel w/out Loudspeaker, w/Fixed Mic 14.2 in. (36 cm)
Mounting Screws

CAD Drawing

  • Specifications

    SpecificationsFC 4011 F 
    AudioMicrophone Frequency Response100 Hz – 15 kHz
    Microphone Sensitivty -22 dBv/Pa
    Microphone Max. SPL 125 dB (3% THD)
    Microphone equivalent noiseApprox. 20 dB SPL
    Microphone Front/Back ratio >20 dB (1 kHz)
       
    Controls & IndicatorsMicrophone ButtonRed/Green illuminating LED; red indicates microphone is active, green indicates request-to-speak.
    Priority ButtonButton to cancel all active delegate units permanently or temporarily (temp. only in FIFO mode)
    Illuminated RingRing around the microphone head that illuminates bright red when the microphone is on
       
    InterconnectionsConnection to MU 4040/6040 C3.3 ft. (1 m) cable with D-sub HD15 connector (VGA monitor connector) to connect to the MU 4040/604x control box
       
    PowerPower Consumption 
       
    PhysicalDimensions (H x W x D) (without microphone)3.15 x 3.15 x 1.18 in. (80 x 80 x 30 mm)
    Microphone length13.78 in. ( 35 cm) (customizable to 50 cm)
    Colorblack/natural anodized or custom
    Unit Weight0.9 lbs. (0.40 kg)
    Shipping Weight2.0 lbs. (0.91 kg)
    Mountingflush mount with four (4) screws (included)

    Requirements

    Used With

    Accessories

    FAQ

    How many microphones can be connected to a single CU 4010? 
    100
     
    How far can the daisy chain cabling go? 
    A single extension cable must not exceed 330 ft. Maximum total cable length is 660 ft.
     
    Can I mix and match different microphone styles with the system? 
    Yes. You can mix table top units with flush mount units.
     
    Is the cabling proprietary cabling?  
    Yes 
     
    Does the system work with third party control companies such as AMX or Crestron? 
    Yes, however RS 4232 card is required.
     
    How can I use CDS 4000 for an Interpretation system?
    The CDS 4000 is a discussion system only. The mixed floor channel from the CDS 4000 will need to be connected to a separate Interpretation system.

    Is it possible to have the loudspeaker active when a headphone is used on the CDS 4000 unit?
    There are no headphone outputs on the CDS 4000 microphone units.

    What is the maximum number of chairman's units, which can be connected to CDS 4000 discussion system?
    Up to 10 chairman units can be active simultaneously in addition to the 6 possible active delegate units.
     
    Are there any software applications that I can use with the CDS 4000 system?
    Yes, the SW 4210, 4211 and 4220. Features monitoring, microphone control, geographical/mimic display, etc. The software is functional in parallel with other control units such as the MC 4000 and external control systems. Note: The SW 42XX requires an RS 4232 interface card to be inserted into the CU.