DCS 6000 Delegate/Chairman Configurable Unit w/Dual Channel Selectors for Pluggable Mic
DC 6190 P

Highlights

  • Excellent sound quality.
  • Cost-effective structured Cat-5e cabling.
  • Configurable, delegate or chairman operation.
  • Two individual built-in channel selectors with three (3) letter language indicator.
  • User selectable viewing languages
  • Remote microphone gain adjustment.
  • Headphone jacks for assistive listening or language interpretation.
  • Elegant, unobtrusive, black units.
  • Lockable gooseneck.

Overview

The DC 6190 P is a fully digital portable conference unit perfectly suited for permanent meeting rooms or temporary discussion-style meetings with language interpretation. The unit features a built-in loudspeaker, a 3 pin XLR connector for a pluggable gooseneck microphone (sold separately) and two (2) channel selectors with 3 letter language codes.
 
The unit is easily configured for use by either a delegate or a chairman and the two (2) push buttons can be exchanged to match functionality or to match the local language. Two (2) separate channel selectors are available with crystal clear indication on OLED displays enabling two persons to listen to the interpreted language. The loudspeaker is functioning also when both channel selectors are in use. The unit designed for portable use, but can also be installed recessed in a table.

Specifications

 SpecificationsDC 6190 P
AudioLoudspeaker Frequency Response150 Hz – 15 kHz
Loudspeaker diameter3 in. (76 mm)
Loudspeaker maximum power3 W RMS
Channel Selector Frequency Response100 -15kHz
   
Controls & IndicatorsMicrophone ButtonDual button with Red/Green illuminating LED; red indicates microphone is active, green indicates request-to-speak
Mute / Delegates Off ButtonConfigurable button for either temporary muting of the active mic (delegate unit) or turning off all active delegate mics (chairman unit)
Channel SelectorsTwo (2) 3-character alpha-numeric displays to show language channel selection
Channel Select ButtonsTwo (2) sets of buttons to select channel
Headphone Volume ButtonsTwo (2) sets of buttons to change headphone volume
   
InterconnectionsMicrophone ConnectorLockable 3 pin XLR female
Headphone ConnectorTwo (2) 3.5 mm (0.14 in.) stereo headphone connectors
DCS-LANTwo (2) RJ45 ports, screened with auto-termination
   
PowerPower Consumption2.5 Watts
   
PhysicalDimensions (H x W x D)2.4 x 5.5 x 6.6 in. (61 x 150 x 168 mm)
ColorBlack
Unit Weight1.4 lbs. (0.65 kg)
Shipping Weight2.0 lbs. ( 0.9 kg)
MountingTabletop (portable or fixed)
   
Specifications are subject to change without notification

Requirements

Used With

Accessories

FAQ

How many microphone units can be connected to the CU? 
The total number of units that can be connected is based on cable length, type of CU and the type of unit being connected, but on each output of a CU 6010 you can typically get about 30 to 42 delegate/chairman units, or 20 to 30 flush mount units, or 16 Interpreter Sets. More units can be added with extension power supplies. Contact Listen Technical Support for more information.
 
How far can the daisy chain cabling go? 
656 ft. (200 m) without any repeaters. Up to 2,132 ft. (650 m) with repeaters and further when using optical cables. Contact Listen Technical Support for more information.
 
Can I mix and match different microphone styles with the system? 
Yes, all the DCS 6000 units with a loop through (all except the DT/IT) can be connected in parallel or serial configurations.
 
Is the cabling proprietary cabling?  
No, but it must be shielded Cat-5 (FTP /STP). Depending on the specification, higher shielded CAT cables can be used for extension cables as well.
 
Can I use a conference system without chairman unit?
Yes you can, however, there will not be any priority function available. The chairman will not be able to manage the microphone system.
 
How many microphones can be connected to the CU 6005? 
50 without a license, 500 with a license and additional CUs.