6 in. (15 cm) Plenum Ceiling Speaker
LPT-A104-P
Highlights
- Plenum rated to meet fire code
- Excellent sound quality
- Easily mounted
Overview
The LPT-A104-P plenum ceiling speaker offers an easy solution for mounting into acoustical tile or drop ceiling applications. Use in applications where the speaker is going to be installed into a plenum rated air space. Provides excellent sound quality and easily mounted into the ceiling. Requires no additional hardware, but it can be use with the included ceiling tile bridge for extra support.Includes
LPT-A104-P 6 in. (15 cm) Plenum Rated Ceiling Speaker
Ceiling Tile Bridge
Cutout Template
Speaker Installation Guide Specifications
| Specifications | LPT-A104-P | |
| Audio | Frequency Range | 60 Hz - 20 kHz |
| Nominal Sensitivity | 89 dB SPL, 1 W @ 3.3 ft. (1 m) | |
| Rated Maximum SPL | 107 dB, 1 W @ 3.3 ft. (1 m) | |
| Nominal Impedance | 8 ohms | |
| Power | Power Handling | 10 - 80 W |
| Physical | Low-Frequency | 6.5 in. (165 mm) Polypropylene, 1 in. (25.4 mm) Coil on Aluminum Former |
| High-Frequency | 3/4 in. (19 mm) Silk Dome | |
| Enclosure | Backcan: Formed Steel | |
| Baffle/Rim: High Impact Polystyrene | ||
| Termination | Removable Locking Connector with Screw-down Terminals. 2 Input Terminals | |
| Outside Dimensions | 8.6 in. x 10.2 in. (219 mm x 260 mm) / 8.03 in. (204 m) Front of ceiling tile to back of can. | |
| Cutout Size | 9 in. (229 mm) | |
| Depth | 7.5 in. (191 kg) | |
| Weight | 7.53 lbs. (3.42 kg) | |
| Shipping Weight | 8 lbs. (3.6 kg) | |
| Specifications are subject to change without notification | ||
Requirements
-
LA-394-P 16 AWG Plenum Speaker Cable
The plenum speaker wire is used with the room module (RM) to connect speakers to the system.
Used With
-
LPT-R12 ListenPoint Powered Room Module (2 M1 Max/ 60 Watts)
The R12 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the ListenPoint Microphone/Media Interface (M1) via infrared light and provide power amplification (60 Watts) for the speakers mounted in the ceiling or on a wall.
None
Support Documents
FAQ
What are the mounting options available for the LPT-A104-P?
The LPT-A104-P ceiling speaker is meant to be only used in ceiling installed applications. If you can’t install into the ceilings, you can go to the LPT-A106S wall mount speaker.
What is the warranty of the LPT-A104-P?
All ListenPoint accessories have a 90-day warranty.
What colors do the speakers come in?
White
What is the impedance of this speaker?
8 ohm
Why would I use a plenum rated speaker?
Plenum-rated products conform to UL standards, which means that, excluding power supplies, they meet UL 2043 for smoke and heat release in air-handling spaces.
Is the speaker paintable?
Yes, the speakers surface is paintable to match the aesthetics of the room.
How many speakers do I need for my room?
A standard 30 x 30 room requires at least 4 speakers to provide equal audio coverage over all areas. More speakers might be needed for larger or oddly shaped rooms.
How much speaker wire comes with the speaker?
Speaker wire is sold separately. Refer to the LA-394-P in the catalog or on the website for more info.
Where should I place the speakers?
Refer to the Speaker Placement Tech Note (located on the website under Support) for a starting point of speaker placement.
How many speakers can I use in a system?
The ListenPoint room module can power up to eight (8) speakers in parallel.
Can I mix and match ceiling and wall mounted speakers in a system?
Yes, you can use both speakers.
