Listen Technologies Corporation

Overview

The LPT-A105 ceiling speaker offers an easy solution for mounting into acoustical tile or drop ceiling applications. Provides excellent sound quality and easily mounted into the ceiling. Requires no additional hardware, but it can be use with the LPT-A113 tile bridge for extra support.

Specifications

	Specifications	LPT-A105
Audio	Frequency Range	50 Hz - 20 kHz, -10 dB, Half Space
	Nominal Sensitivity	91 dB SPL, 1 W @ 3.3 ft. (1 m)
	Nominal Coverage Angle	110° (Conical Coverage)
	Nominal Impedance	8 ohms
Power	Power Capacity	40 W Continuous Program Power, 100 W Continuous Pink Noise
Physical	Termination	Removable locking connector w/ screw-down terminals, 2 input terminals
	Woofer	8" (203 mm) Polypropylene w/ Rubber
	Tweeter	1/2 in. (12.7 mm) Mylar Tweeter
	Cutout Size	9.88 in. (251 mm)
	Depth	5.5 in. (140 mm)
	Weight	5 lbs. (2.27 kg)
	Shipping Weight	5 lbs. (2.27 kg)
Specifications are subject to change without notification

Requirements

• 

  LA-394-P 16 AWG Plenum Speaker Cable

  The plenum speaker wire is used with the room module (RM) to connect speakers to the system.

Used With

• 

  LPT-R24 ListenPoint High Powered Room Module (4 Mic Max/ 120 Watts)

  The R24 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide power amplification (120 Watts) for the speakers mounted in the ceiling or on a wall.

• 

  LPT-R4 ListenPoint Room Module (4 Mic Max/ No Power Amp.)

  The R4 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide audio to an existing sound system.

• 

  LPT-R22 ListenPoint High Powered Room Module (2 Mic Max/ 120 Watts)

  The R22 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide power amplification (120 Watts) for the speakers mounted in the ceiling or on a wall.

• 

  LPT-R2 ListenPoint Room Module (2 Mic Max/ No Power Amp.)

  The R2 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide audio to an existing sound system.

• 

  LPT-R14 ListenPoint Powered Room Module (4 Mic Max/ 60 Watts)

  The R14 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide power amplification (60 Watts) for the speakers mounted in the ceiling or on a wall.

• 

  LPT-R12 ListenPoint Powered Room Module (2 Mic Max/ 60 Watts)

  The R12 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone/media interface via infrared light and provide power amplification (60 Watts) for the speakers mounted in the ceiling or on a wall.

Accessories

• 

  LPT-A113 Ceiling Tile Bridge

  The ceiling tile bridge is a simple way to add extra support that may be needed for drop ceiling tile applications.

Support Documents

» INSTALLATION TEMPLATE: LPT-A105 Speaker Cut-Out

» DATA SHEET: LPT-Ax ListenPoint Speakers

FAQ

8 ohm