ListenPoint C6/R24 Frame
LPT-F7
Highlights
- Accommodates four M1 Microphones
- 120 Watts of power
- Advanced CU with balanced and unbalanced inputs/outputs
- Teleconferencing interface for VOIP calling or interface to other teleconferencing units
- Additional Power supply included
Overview
The LPT-F7 frame includes the six (6) input C6 advanced control unit and the R24 room module that can accept up to four (4) M1 microphones while delivering 120 watts RMS speaker power.Includes
(1) LPT-C6 ListenPoint Advanced Control Unit
(1) LPT-R24 ListenPoint High Powered Room Module (4 Mic Max/ 120 Watts) Configurations
LPT-F7-01 ListenPoint C6/R24 Frame (North America)*
LPT-F7-02 ListenPoint C6/R24 Frame (Asia, UK)*
LPT-F7-03 ListenPoint C6/R24 Frame (Euro)*
LPT-F7-04 ListenPoint C6/R24 Frame (Australia)*
None
None
None
Support Documents
FAQ
How are the stereo inputs handled?
All stereo inputs are summed internally to a mono signal. The rest of the signal path within the ListenPoint™ system is mono. Even though the CU has a Left and Right Line Output, it is actually a mono signal.
Does the CU have an Auto-Off feature?
The microphones have an auto-off feature, however the CU does not.
Does the LPT-C6 include a rack mount kit?
No, you need to purchase the LPT-A101 Rack Mount Kit separately.
Can I use Cat-6 or Cat-7 cable with the CU?
Yes, however Cat-5e is the minimum.
What is the maximum length of Cat-5e cable between CU and RM?
Maximum length for full power is 75 ft. (23 m)
What is the warranty of the LPT-C6?
The ListenPoint™ system has a 5 year warranty on core product that covers all manufacturing defects. Also all accessories have a 90 day warranty.
How much does the RM weigh?
The RM weigh’s 1.75 lbs. (.8 kg)
Can I interface to a 70 volt system?
If your facility has a 70 volt (or 25 volt or 8 ohm) paging system, you can feed that signal into the “Paging Input” on the RM. The RM can pass the page through to your ListenPoint™ speakers, and/or duck the audio from the ListenPoint™ system. The ListenPoint™ system does not have a 70 volt output. The four power amplifiers are designed to drive either 8 or 4 ohm loads. You may however use either a non-powered RM or take the Line Output from the CU and drive a 70 volt power amplifier.
Does the system have Muting or Ducking function during Paging?
Yes, there are four levels of ducking Low, Medium, High, and off. Low is 6 db, Med is 12 db, and high is 18 db.
Do additional sensors need the additional power supply in the RM?
No, all sensors are powered off one RM and its power supply.
Will the 4-microphone sensors cover more area than the 2-microphone sensors?
No. The only difference in these two sensors is how many IR channels they can operate simultaneously.
What is the maximum length of Cat-5e cable between CU and RM?
Maximum length for full power is 75 ft. (23 m)
How large of an area can systems cover?
The RM with its onboard sensor emitter can accommodate a 25’ x 25’ (8 meters by 8 meters) room. For larger rooms you will need to add up to two additional remote IR sensors. Remember, when adding sensors that a 2 mic or 4 mic sensors must be chosen.
What are the mounting options that are included with the LPT-R24?
Ceiling Mount (Ceiling Box, Wall board or Drop Ceiling), Wall Mount (Wall Box or Wall Board) and Table Mount (Top and Bottom).
How many microphones can be used with the LPT-R24?
Four (4) Microphones can be use at one time.
What is the warranty of the LPT-R24?
The ListenPoint™ system has a 5 year warranty on core product that covers all manufacturing defects. Also all accessories have a 90 day warranty.