• Home  > 
  • Digital IR Medium Power Radiator

Digital IR Medium Power Radiator
RA 6013

Highlights

  • Up to 32 channels.
  • 14,000 ft² radiator coverage.
  • Can be used in bright sunlight.
  • Daisy-chain option.
  • Delay compensation.
  • Noise-free operation.
  • Automatic standby.
  • Overheat protection

Overview

The RA 6013 Digital IR Medium Power Radiator converts the digital, modulated signal from the transmitter into invisible Infra Red light. The unit is powered locally and has the ability to broadcast up to 32 mono channels simultaneously. The coverage area can be as great as 14,000 ft² (1300 m²) when using four (4) mono standard quality channels. When more channels and/or a higher channel quality and/or stereo signals are used, the coverage area is reduced.
 
The radiator operates noise-free and its status is indicated by both the LED’s in the unit and by the LCD on the Digital Transmitter. The radiator goes automatically standby when the transmitter is switched off to extend the operating life. The radiator can be either wall-mounted or stand-mounted and up to 30 Digital Radiators can be daisy-chained into a 2,950 ft. (900 m) daisy chain.

Includes

RA 6013 Digital IR Medium Power Radiator
Mounting Hardware (Wall Bracket sold seperately)
Line Cable

CAD Drawing

    • Specifications

     SpecificationsRA 6013
    Controls & IndicatorsDelay switchesTwo (2) rotary switches to set the a signal delay when used in a daisy-chain
    LED'sTwo (2) yellow and Two (2) red LED's to indicate radiator status
    Half-power switchSwitch to de-activate half the IR-LED's of the unit, thus reducing emitted power and power consumption by half
     
    InterconnectionsMains SocketEuro mains socket, matching mains cable 5.58 ft. (1.7 m) included.
    Radiator Chain InputOne (1) BNC female connector to connect the input signal
    Radiator Chain Loop-ThroughOne (1) BNC female connector to connect the next radiator
       
    PowerSupply Voltage90 - 260 VAC
    Power Consumption100 W
    Total IR output at 20 °C - room temp8 Wrms 16 Wpp
    Angle of half intensity +/- 22 degrees
       
    PhysicalDimensions (H x W x D) (without brackets)7.9 x 19.7 x 6.9 in. (200 x 500 x 175 mm)
    ColorBronze w/black
    Unit Weight (with bracket)16.8 lbs. (7.60 kg)
    Shipping Weight18.0 lbs (8.16 kg)
    MountingWall-mounted or stand-mounted
       
    CapacityMaximum coverage area10,000 ft² (929.0 m²) w/ four (4) channels mono standard quality
    Total Maximum Radiator cable Lengthapprox. 2,970 ft. (900 m)
     
    Specifications are subject to change without notification

    Requirements

    Used With

    Accessories

    Support Documents

    • FAQ

    Is there a floor stand for the RA 6013 and RA 6025 infrared radiator?
    Yes, our floor stand LA-337 can be used to mount these radiators.
     
    How can I avoid interference between lighting and Digital IR systems?
    Our Digital IR system is interference free from lighting equipment and day/sun light.
     
    How can I mount an infrared Radiator RA 6013 or RA 6025 to the wall?
    Use a Wall mounting bracket WB 6000. The bracket has 4 holes for mounting to the wall. The unit includes a template for accurate positioning.
     
    Is it necessary to terminate unused outputs of the Digital IR transmitter or Radiators?
    No, not needed. All outputs are terminated automatically.

    Contact Us