Overview

The C6 ListenPoint Control Unit is the heart of a ListenPoint system offering six audio inputs. The C6 has input/output connections to a computer which enables teachers to conduct Virtual Field Trips via Skype. It’s simple and easy for teachers with one, intuitive control for adjusting volume. Active audio sources are automatically selected so teachers can either use the single control on the control unit or on the M1 microphone to change volume – SIMPLE! The Control Unit connects to the Room Module using a single Cat-5e cable. Extensive customization of system through password protected front panel or via USB port. The backlit, tilting LCD is easy to read and displays the status of all microphones on the system including battery level. Designed to blend into any room, the control unit can be wall, desk or rack mounted.

Includes

One (1) LPT-C6 ListenPoint Advanced Control Unit
One (1) LPT-A102 Mounting Platform
Mounting Hardware
    Four (4) #6 Long Screws
    Four (4) #6 Short Screws
    Four (4) #8 Long Screws
    Four (4) #8 Wall Anchors
Two (2) LPT-A108 5-pin Euro Connectors
One (1) LPT-A112 19 VDC Universal Power Supply
One (1) Line Cord
One (1) Quick Reference Card
One (1) Installation Guide

Highlights

  • Six audio inputs including (4) unbalanced inputs, (2) balanced inputs, (1) balanced output and (1) unbalanced output 
  • Computer input/output connections allows teachers to conduct Virtual Field Trips via Skype
  • One intuitive control for adjusting volume
  • Automatic audio selection allows teacher to change volume via the single control on the control unit or on the M1 microphone
  • Single point of connection via Cat-5e cabling to the room module makes installation and maintenance simple
  • Backlit, tilting LCD Screen shows audio selection, volume, microphone status and battery level. When mounted the LCD can be inverted 180° for optimum viewing angle
  • Designed to blend into any room, can be wall, desk or rack mounted with supplied mounting platform and hardware
  • Extensive customization of system through password protected front panel or via USB port
Configurations & Architectural Specs

Configurations

LPT-C6-01 ListenPoint Advanced Control Unit (North America)*
LPT-C6-02 ListenPoint Advanced Control Unit (Asia, UK)*
LPT-C6-03 ListenPoint Advanced Control Unit (Euro)*
LPT-C6-04 ListenPoint Advanced Control Unit (Australia)*
 
*01, 02, 03, and 04 designation refers to international plug type (type B, G, C, and I) for the power supply.

Architectural Specs

The control unit shall be capable of accepting six (6) inputs, four (4) of which shall be unbalanced and two (2) of which shall be balanced. The unit shall have a balanced teleconferencing input and output connector and the output shall be mix minus. The unit shall incorporate a single digital rotary control and tilting LCD display for selecting audio, setting volume, system customization, and to see the status of the microphones. The control unit shall incorporate automatic audio selection of audio sources and microphones connected to the system shall control the volume of such source. The unit shall be connected to a corresponding room module using a standard Cat-5e cable. The unit shall be capable of being configured via a USB port. The unit shall be capable of being mounted on a wall or table by means of a snap in platform and shall be wall, desk, or rack mountable. The ListenPoint LPT-C6 Control Unit is specified.

CAD file(s)

Product Specifications
SpecificationLPT-C6-01

Audio

Headphone Output PowerOne (1) 3.5 mm stereo connector, unbalanced, adjustable output level, +10 dBu maximum, impedance 10 Ohm.
Unbalanced InputFour (4) Stereo inputs via phono connectors, unbalanced, -10dBu nominal input level, +2 dBu maximum, adjustable -30/+12dB, impedance 100k Ohms.
Unbalanced OutputOne (1) Dual Mono Output, Phono Connector, -10dBu, 10 Ohm
Balanced InputOne (1) Balanced Input, Euro Connectors, 0 dBu nominal, +12dBu maximum, 10k Ohm
Balanced OutputOne (1) Balanced Output, Euro Connectors, 0 dBu, 600 Ohm
Teleconferencing InputOne (1) Balanced Input, Euro Connectors, 0dBu nominal, +12 dBu maximun, 10k Ohm
Teleconferencing OutputOne (1) Balanced Output, Euro Connectors, 0 dBu, 600 Ohm
Input to Output Frequency Response20 Hz to 20 kHz, +/- 2 dB, < 2.0% THD, > 75 dB SNR
Microphone to Output Frequency Response200 Hz to 15 kHz, +/- 2 dB, < 2.0% THD, > 75 dB SNR

Controls

Front PanelPower Button, LCD, Control Dial, Headphone Level
Rear PanelUSB , CAT-5e Output w/ LED indicator, Power Input, System Reset

Power

Power Supply Input100-240 VAC, 50-60 Hz
Power Supply Output19 VDC, 3.2 A, 60.8 w
Power Supply ConnectorDC Plug type Connector, .2 in (5.5 mm) OD, center positive
Power Cord Length 6.0 ft. (1.8 m)

Physical

Shipping Weight3.0 lbs. (1.4 kg)
MountingMounting platform provided for wall, desk, electrical boxes.
MountingCable Cover: Mounts to mounting platform.
Dimensions (H x W x D)1.5 x 8.5 x 6.9 in. (3.8 x 20.4 x 17.5 cm)
Mounting Platform and Cable Cover Dimensions (H x1.3 x 2.4 x 4.8 in. (34 x 60 x 122 cm)
Power Supply Dimensions (H x W x D)1.9 x 8.5 x 9.8 in. (4.7 x 20.4 x 24.9 cm)
Control Unit Weight1.5 lbs. (.68 kg)
Power Line CordLine cord is determined by each country's AC power standards.

Compliance

Power Supply ComplianceUL, CE, ROHS, FCC, Industry Canada
Control UnitCE, ROHS, FCC, Industry Canada
Used With
Accessories
FAQ
QCan the LPT-C2 be programmed via software?
AYes, using the USB port through the LPT-A141 software the LPT-C2 and LPT-C6 are fully customizable.
QHow much does the LPT-A141 software cost?
AThe software is free of charge and downloadable from our website.
QWhat is different between the two versions of CU’s?
AThe C2 Control Unit offers two (2) unbalanced inputs and one (1) unbalanced output and a USB port for customization. The C6 Control Unit offers a balanced input/output, a teleconferencing input/output, four (4) unbalanced inputs, one (1) unbalanced output and USB port for customization.
QDoes the LPT-C6 include a rack mount kit?
ANo, you need to purchase the LPT-A101 Rack Mount Kit separately.
QWhat is the warranty of the LPT-C6?
AThe ListenPointâ„¢ system has a 5 year warranty on core product that covers all manufacturing defects. Also all accessories have a 90 day warranty.
QCan I use Cat-6 or Cat-7 cable with the CU?
AYes, however Cat-5e is the minimum.
QWhat is the maximum length of Cat-5e cable between CU and RM?
AMaximum length for full power is 75 ft. (23 m)
QWill the ListenPoint system accept stereo inputs?
AYes, All stereo inputs are summed internally to a mono signal. The rest of the signal path within the ListenPointâ„¢ system is mono. Even though the CU has a Left and Right Line Output, it is actually a mono signal.
Copyright © 1998 - 2020 Listen Technologies Corporation. All rights reserved.
Listen, ListenPoint and related marks and logos are registered trademarks of Listen Technologies Corporation. Terms of Use | Privacy Policy
Listen Technologies
Loading...
Loading...
Loading...
Loading...
Loading...