Field Strength Meter + Cables
Also Needed
Specs
+Audio
| Frequency Response | 50 Hz to 8 kHz ±0.25 dB, 30 Hz to 10 kHz -3 dB |
| Cables | One (1) Stereo 3.5 mm to Dual RCA 6.6 ft. (2 m) |
| Cables | One (1) Stereo 3.5 mm to Balanced XLR and Electret Microphone Mono 3.5 mm |
| Gain Stability | Better then 0.5 dB over all conditions |
+Indicators
| LEDs | Color Coded - Green for -3 to +3 dB, Red for -4 to -22 dB |
+Interconnections
| Headphone Connector | 3.5 mm Stereo Conenctor, 16 Ohms (32 Ohms per side) |
| Adapter | One (1) RCA to Mono ¼” Adapter |
+Loop
| Coil Orientation | Vertical when held upright |
| Reference Level | 400 mA/m (In field strength mode) |
+Power
| Battery Type | Two (2) x AA Alkaline |
| Battery Life | Up to 100 hrs. use, dependant on use pattern |
| Battery Monitor | Battery OK when LED illuminated |
+Physical
| Width | 3.3 in. (84 mm) |
| Height | 5.5 in. (140 mm) |
| Depth | 1.0 in. (27 mm) |
| Shipping Weight | 1.5 lbs. (0.68 kg) |
| Weight | 1.5 lbs. (0.68 kg) |
| Environment | IP20 Protection, 20 to 90% Relative Humidity, 14 F (-10 C) to 113 F (45 C) |
