Chairman Flush Unit w/ 5 Voting Buttons, Single Channel Selectors for Pluggable Mic
CM 6680 F

Highlights

  • Excellent sound quality.
  • Cost-effective structured Cat-5e cabling.
  • Yes/no/abstain and multiple choice voting with color coded buttons.
  • Built-in channel selector with three (3) letter language indicator.
  • Optional chip card/PIN code identification.
  • Priority button.
  • User selectable viewing languages
  • Remote microphone gain adjustment.
  • Headphone jacks for assistive listening or language interpretation.
  • Elegant, unobtrusive, black units.
  • Lockable gooseneck.

Overview

The CM 6680 F Chairman Flush Unit is a cost-effective way to permanently flush mount a loudspeaker, a pluggable microphone with microphone button, yes/no/abstain and multiple choice voting buttons, a channel selector and chip card reader. Made of black anodized aluminum, the unit is very unobtrusive. Each unit enables the conference chair to speak, register a request-to-speak and listen to other speakers, cast a vote, listen to language channels and override delegates with the priority button.
 
The unit can either be controlled by the microphone button or remotely by the operator. The gain/sensitivity of the microphone/loudspeaker can be remotely controlled by the operator. The microphone button contains an LED to indicate whether the unit is on (RED) or in the request-to-speak queue (GREEN). The unit provides a lockable 3 pin XLR connector for a pluggable microphone (sold separately). The loudspeaker is automatically switched off when the microphone is activated to prevent acoustic feedback. Mounting is easy with available screw holes on all corners of the unit. The units can be easily daisy chained with shielded FTP or STP Cat-5e cables (sold separately) and can be customized to fit any application.

Specifications

 SpecificationsCM 6680 F
AudioLoudspeaker Frequency Response150 Hz – 15 kHz
Loudspeaker diameter3 in. (76 mm)
Loudspeaker maximum power3 W RMS
Channel Selector Frequency Response100 -14 kHz
   
Controls & IndicatorsMicrophone ButtonDual button with Red/Green illuminating LED; red indicates microphone is active, green indicates request-to-speak
Priority ButtonButton to cancel all active delegate units permanently or temporarily
Illuminated RingRing around the microphone head that illuminates bright red when the microphone is on
Channel Selector3-character alpha-numeric displays to show language channel selection
Channel Select ButtonsOne (1) Set of buttons to select channel
Headphone Volume ButtonsOne (1) Set of buttons to change volume of the headphone
Voting ButtonsGreen (YES), White (ABSTAIN), Red (NO) and two additional voting buttons
   
InterconnectionsMicrophone ConnectorLockable 3 pin XLR female
Headphone ConnectorTwo (2) 3.5 mm (0.14 in.) stereo headphone connectors
DCS-LANTwo (2) RJ45 ports, screened with auto-termination
   
PowerPower Consumption3.5 Watts
   
PhysicalDimensions (H x W x D)3.54 x 9.25 x 2.09 in. (90 x 235 x 53 mm)
ColorBlack
Unit Weight2 lbs. (0.9 kg)
Shipping Weight3 lbs. (1.36 kg)
MountingFlush mount with four (4) screws (provided)
   
Specifications are subject to change without notification

Requirements

Used With

Accessories

FAQ

Do I need software to use the voting feature? 
Software is required to handle the voting, results, display etc.
 
How many microphone units can be connected to the CU? 
The total number of units that can be connected is based on cable length, type of CU and the type of unit being connected, but on each output of a CU 6010 you can typically get about 30 to 42 delegate/chairman units, or 20 to 30 flush mount units, or 16 Interpreter Sets. More units can be added with extension power supplies. Contact Listen Technical Support for more information.
 
How far can the daisy chain cabling go? 
656 ft. (200 m) without any repeaters. Up to 2,132 ft. (650 m) with repeaters and further when using optical cables. Contact Listen tech support for more information.
 
Can I mix and match different microphone styles with the system? 
Yes, all the DCS 6000 units with a loop through (all except the DT/IT) can be connected in parallel or serial configurations.
 
Is the cabling proprietary cabling?  
No, but it must be shielded Cat-5 (FTP /STP). Depending on the specification, higher shielded CAT cables can be used for extension cables as well.
 
Can I use a conference system without chairman unit?
Yes you can, however, there will not be any priority function available. The chairman will not be able to manage the microphone system.
 
How many microphones can be connected to the CU 6005? 
50 without a license, 500 with a license and additional CUs.