Chairman Flush Panel w/out Loudspeaker for Pluggable Mic FC 6021 F

Home >
Conferencing Products >
Digital Conferencing >
Chairman Flush Panel w/out Loudspeaker for Pluggable Mic

Chairman Flush Panel w/out Loudspeaker for Pluggable Mic
FC 6021 F

Highlights

Excellent sound quality.
Remote microphone gain adjustment.
Priority override.
Elegant, unobtrusive, black units.
Lockable gooseneck.
Push-to-talk operation introduces structure to the meeting.

Overview

The FC 6021 F Chairman Flush Panel is a cost-effective way to permanently flush mount a microphone, microphone button and priority override button. Made of 2.5 mm black anodized aluminum, the panel is very unobtrusive. The unit enables conference chairs to speak, register a request-to-speak, listen to other speakers and override delegates with the priority button. The unit can either be controlled by the microphone button or remotely by the operator. The unit provides a lockable 3 pin XLR connector for a pluggable microphone (sold separately). Mounting is easy with available screw holes on all four corners of the unit. A single 3.3 ft. (1 m) cable is provided to connect to the under-the-table MU 4040 (CDS 4000) or MU 6040 C (DCS 6000) control box. The panel can be customized to fit your specific application.

Specifications

	Specifications	FC 6021 F
Controls & Indicators	Microphone Button	Dual button with Red/Green illuminating LED; red indicates microphone is active, green indicates request-to-speak
Controls & Indicators	Delegate Off Button	Button to cancel all active delegate units permanently or temporarily

Interconnections	Microphone Connector	Lockable 3 pin XLR female
Interconnections	Connection to MU 4040/6040 C	3.3 ft. (1 m) cable with D-sub HD15 connector (VGA monitor connector) to connect to the MU 4040/604x control box

Physical	Dimensions (H x W x D)	3.5 x 3.5 x 1.2 in. (90 x 90 x 33 mm)
	Cut Out Dimensions (H x W x D)	2.95 x 2.95 in. (75 x 75 mm), Corners radius .15 in. (4 mm)
	Color	Black
	Unit Weight	1 lb. (0.1 kg)
	Shipping Weight	1 lb. (0.1 kg)
	Mounting	Flush mount with four (4) screws (provided)

Specifications are subject to change without notification

Requirements

MU 4040 CDS 4000 Single Delegate/Chairman Microphone Unit fo Flush Panels

The Single Delegate/Chairman Microphone Unit is required to connect flush mount panels or 3^rdparty dynamic microphones and/or loudspeakers to the CDS 4000 system.
MU 6040 D DCS 6000 Single Delegate Microphone Unit for Flush Panels

The Single Microphone Unit is required to connect flush panels or 3^rdparty dynamic microphones and/or loudspeakers to the DCS 6000 system.
MU 6040 C DCS 6000 Chairman Microphone Unit for Flush Panels

The Single Microphone Unit is required to connect flush panels or 3^rdparty dynamic microphones and/or loudspeakers to the DCS 6000 system.
MU 6042 D DCS 6000 Dual Delegate Microphone Unit for Flush Panels

The Dual Microphone Unit is required to connect the FD 6012 F Dual Delegate Flush Panel to the DCS 6000 system.

Used With

FC 6020 F Chairman Flush Panel for Pluggable Mic

The Chairman Flush Panel is a cost-effective way to permanently flush mount a loudspeaker, a microphone, microphone button and priority override button.
AO 6008 DCS 6000 8-Channel Analog Output Unit

The Audio Output Unit outputs eight (8) floor or language channels to IR language distribution systems, RF transmitters, recording and/or web-streaming devices.
FD 6120 F Delegate Flush Panel for Pluggable Mic

The Delegate Flush Panel is a cost-effective way to permanently flush mount a loudspeaker, a microphone and microphone button.
PS 6000 DCS 6000 In-Line Extension Power Supply

Extension power supply to add four (4) 125W chains to the DCS-LAN.
CM 6680 F Chairman Flush Unit w/ 5 Voting Buttons, Single Channel Selectors for Pluggable Mic

The Chairman Flush Unit is a cost-effective way to permanently flush mount a loudspeaker, a pluggable microphone with microphone button, yes/no/abstain and multiple choice voting buttons, a channel selector and chip card reader.
CU 6005 DCS 6000 Medium Power Central Control Unit

Powers and controls the conference units, mixes the audio, distributes simultaneous interpretation language channels and conducts voting sessions.
GM 6523 Advanced Pluggable Microphone 16 in. (40 cm)

The microphone is a high performance condenser microphone developed to for the pluggable CDS 4000 and DCS 6000 table top and flush mount units.
DM 4420 P CDS 4000 Delegate Unit for Pluggable Mic

Portable conference delegate unit perfectly suited for meeting rooms or temporary discussion-style meetings.
MU 4040 CDS 4000 Single Delegate/Chairman Microphone Unit fo Flush Panels

The Single Delegate/Chairman Microphone Unit is required to connect flush mount panels or 3^rdparty dynamic microphones and/or loudspeakers to the CDS 4000 system.
DM 6680 F Delegate Flush Unit w/ 5 Voting Buttons, Single Channel Selector for Pluggable Mic

The DM 6680 F Delegate Flush Unit is a cost-effective way to permanently flush mount a loudspeaker, a pluggable microphone with microphone button, yes/no/abstain and multiple choice voting buttons, a channel selector and chip card reader.
MU 6040 D DCS 6000 Single Delegate Microphone Unit for Flush Panels

The Single Microphone Unit is required to connect flush panels or 3^rdparty dynamic microphones and/or loudspeakers to the DCS 6000 system.
DM 6080 F Delegate Flush Unit w/ Single Channel Seletor & Loudspeaker for Pluggable Mic

The DM 6080 F Delegate Flush Unit is a cost-effective way to permanently flush mount a loudspeaker, a pluggable microphone with microphone and mute buttons, and a channel selector.
AM 6040 DCS 6000 Ambient Microphone Unit

The Ambient Microphone Unit is used to connect an ambient microphone (sold separately) to pick up background sound in the conference room.
DC 6190 P DCS 6000 Delegate/Chairman Configurable Unit w/Dual Channel Selectors for Pluggable Mic

The fully digital portable conference unit is perfectly suited for permanent meeting rooms or temporary discussion-style meetings with language interpretation.
IS 6132 P DCS 6000 32-Channel Interpreter Set for Pluggable Mic

The 32-Channel Interpreter Set is a fully digital, portable, single-user interpreter desk, fully compliant to international standards. The set features two (2) outgoing A/B channels and four (4) input relay buttons.
JB 6002 DCS 6000 2 Tap-Out Junction Box

The Tap-Out Junction Box provides two (2) or four (4) tap-outs from the daisy-chain.
MB 2932 FC DCS 6000 Flight Case for one Interpreter Booth

Flight case for one (1) MB 2932 Interpreter booth.
AO 6004 DCS 6000 4-Channel Analog Output Module

The Audio Output Unit outputs four (4) floor or language channels to IR language distribution systems, RF transmitters, recording and/or web-streaming devices.
FD 6121 F Delegate Flush Panel w/out Loudspeaker for Pluggable Mic

The Delegate Flush Panel is a cost-effective way to permanently flush mount a microphone, microphone button and priority override button. Made of 2.5 mm black anodized aluminum, the panel is very unobtrusive.
RP 6004 DCS 6000 Repeater

Splits one (1) DCS-LAN chain into four (4).
CM 4420 P CDS 4000 Chairman Unit for Pluggable Mic

The CM 4420 P is a portable conference chairman unit perfectly suited for meeting rooms or temporary discussion-style meetings.
EX 6010 DCS 6000 Extension Power Supply

Extension power supply to regenerate the signal.
CM 6080 F Chairman Flush Unit w/ Single Channel Selector & Loudspeaker for Pluggable Mic

The CM 6080 F Chairman Flush Unit is a cost-effective way to permanently flush mount a loudspeaker, a pluggable microphone with microphone button, a priority button and a channel selector.
CU 6011 DCS 6000 High Power Central Control Unit

Powers and controls the conference units, mixes the audio, distributes simultaneous interpretation language channels and conducts voting sessions.
GM 6524 Advanced Pluggable Microphone 20 in. (50 cm)

The microphone is a high performance condenser microphone developed to for the pluggable CDS 4000 and DCS 6000 table top and flush mount units.
DM 6680 P DCS 6000 Delegate Unit /5 Voting Buttons for Pluggable Mic

Cost effective solution to compliment the same elegant design of the DC 6990 P touchscreen conference unit.
MU 6040 C DCS 6000 Chairman Microphone Unit for Flush Panels

The Single Microphone Unit is required to connect flush panels or 3^rdparty dynamic microphones and/or loudspeakers to the DCS 6000 system.
DM 6620 F Delegate Flush Unit w/ 5 Voting Buttons for Pluggable Mic

The DM 6620 F Delegate Flush Unit is a cost-effective way to permanently flush mount a loudspeaker, a pluggable microphone with microphone button, yes/no/abstain voting buttons and chip card reader.
MU 6042 D DCS 6000 Dual Delegate Microphone Unit for Flush Panels

The Dual Microphone Unit is required to connect the FD 6012 F Dual Delegate Flush Panel to the DCS 6000 system.
DC 6990 P DCS 6000 Single /Dual User Configurable 3.5 in (9 cm) Touchscreen Unit for Pluggable Mic

Fully digital portable conference unit perfect for permanent or temporary meetings with speech, voting and/or language interpretation.
DV 6501 F DCS 6000 3 Button Flush Mount Voting Unit

Cost-effective way to permanently flush mount yes/no/abstain voting buttons and a chip card reader.
DC 6120 P Delegate/Chairman Configurable Unit for Pluggable Mic

The fully digital portable conference unit perfectly suited for permanent meeting rooms or temporary discussion-style meetings.
CS 6032 FHB1 DCS 6000 Flush Mount Channel Selector

Compact flush-mounted channel selector that distributes the floor, for assistive listening, as well as the language interpretation channels to seating positions.
JB 6004 DCS 6000 4 Tap-Out Junction Box

The Tap-Out Junction Box provides two (2) or four (4) tap-outs from the daisy-chain.

Accessories

GM 6523 Advanced Pluggable Microphone 16 in. (40 cm)

The microphone is a high performance condenser microphone developed to for the pluggable CDS 4000 and DCS 6000 table top and flush mount units.
GM 6524 Advanced Pluggable Microphone 20 in. (50 cm)

The microphone is a high performance condenser microphone developed to for the pluggable CDS 4000 and DCS 6000 table top and flush mount units.

Support Documents

DATA SHEET: FC 6021 F Chairman Flush Panel w/out Loudspeaker for Pluggable Mic

FAQ

How many microphone units can be connected to the CU?

The total number of units that can be connected is based on cable length, type of CU and the type of unit being connected, but on each output of a CU 6010 you can typically get about 30 to 42 delegate/chairman units, or 20 to 30 flush mount units, or 16 Interpreter Sets. More units can be added with extension power supplies. Contact Listen Technical Support for more information.

How far can the daisy chain cabling go?

656 ft. (200 m) without any repeaters. Up to 2,132 ft. (650 m) with repeaters and further when using optical cables. Contact Listen tech support for more information.

Can I mix and match different microphone styles with the system?

Yes, all the DCS 6000 units with a loop through (all except the DT/IT) can be connected in parallel or serial configurations.

Is the cabling proprietary cabling?

No, but it must be shielded Cat-5 (FTP /STP). Depending on the specification, higher shielded CAT cables can be used for extension cables as well.

Can I use a conference system without chairman unit?

Yes you can, however, there will not be any priority function available. The chairman will not be able to manage the microphone system.

How many microphones can be connected to the CU 6005?

50 without a license, 500 with a license and additional CUs.

Can I mix and match different microphone styles with the system?

Yes. You can mix table top units with flush mount units.