ADA Calculator
ListenPoint Presentation System
LPT-S1
Highlights
- Use this simple system to for audio structure and add speakers of your choice (speakers not included)
- Includes one (1) Microphone/Media Interface Kit (M1). The kit includes an advanced Li-ion rechargeable battery, charging station and clips to use the M1 in three (3) different configurations including lanyard, hand-held and belt worn.
- Uses the two (2) input C2 Standard Control Unit and the R12 Room Module that delivers 60 Watts RMS of speaker power.
- Core System components offer 5 year warranty.
- Interconnection cables and mounting platforms are included.
Overview
This ListenPoint® Presentation System is ideal for small to medium size rooms where the user wishes to use their own speakers and is looking for audio structure. This Presentation System offers two (2) direct inputs and one (1) output on the CU, the RM that delivers 60 Watts of power and the Microphone/Media Interface Kit (M1). The Basic System offers both performance and value and is ideal for classrooms, training rooms, and flex rooms.Includes
(1) LPT-C2 ListenPoint® Standard Control Unit
(1) LPT-R12 ListenPoint® Powered Room Module (2 M1 Max/ 60 Watts)
(1) LPT-M1 ListenPoint® Microphone/Media Interface Kit
(1) LA-393-P-55 Cat-5e Preassembled Plenum Cable 55 ft. (16.8 m)
Configurations
LPT-S1-01 Basic ListenPoint System (North America)*
LPT-S1-02 Basic ListenPoint System (Asia, UK)*
LPT-S1-03 Basic ListenPoint System (Euro)*
LPT-S1-04 Basic ListenPoint System (Australia)*
None
None
None
Support Documents
FAQ
Will the ListenPoint system accept stereo inputs?
Yes, All stereo inputs are summed internally to a mono signal. The rest of the signal path within the ListenPoint™ system is mono. Even though the CU has a Left and Right Line Output, it is actually a mono signal.
Does the CU have an Auto-Off feature?
The M1s have an auto-off feature, however the CU does not.
Does the LPT-C2 include a rack mount kit?
No, you need to purchase the LPT-A101 Rack Mount Kit separately.
Can I use Cat-6 or Cat-7 cable with the CU?
Yes, however Cat-5e is the minimum.
What is the maximum length of Cat-5e cable between CU and RM?
Maximum length for full power is 75 ft. (23 m)
How much does the RM weigh?
The RM weigh’s 1.75 lbs. (.8 kg)
Can I interface to a 70 volt system?
If your facility has a 70 volt (or 25 volt or 8 ohm) paging system, you can feed that signal into the “Paging Input” on the RM. The RM can pass the page through to your ListenPoint™ speakers, and/or duck the audio from the ListenPoint™ system. The ListenPoint™ system does not have a 70 volt output. The four power amplifiers are designed to drive either 8 or 4 ohm loads. You may however use either a non-powered RM or take the Line Output from the CU and drive a 70 volt power amplifier.
Does the system have Muting or Ducking function during Paging?
Yes, there are four levels of ducking Low, Medium, High, and off. Low is 6 db, Med is 12 db, and high is 18 db.
How large of an area can systems cover?
The RM with its onboard sensor emitter can accommodate a 30’ x 30’ (9 m by 9 m) room. For larger rooms you will need to add up to two additional remote IR sensors.
What are the mounting options that are included with the LPT-S1?
Ceiling Mount (Ceiling Box, Wall board or Drop Ceiling), Wall Mount (Wall Box or Wall Board) and Table Mount (Top and Bottom).
How many microphones can be used with the LPT-R12?
Two (2) M1s can be use at one time.
What is the pickup pattern?
The ListenPoint™ M1 has an omni-directional pattern.
When I plug in the external microphone into the M1 does it disable the microphone element on the M1?
Yes, the external microphone takes precedence over the internal microphone.
On the external line input on the M1 can I mix my microphone audio with this and how do I adjust the input level?
Yes, the external line input on the M1 will mix with either the external microphone or the internal microphone. You adjust the level of the mix by changing the output level on your external device e.g. the output of your iPod.
Can I lock out the buttons on a M1?
Yes you can via local programming of the M1.
What is the warranty of the LPT-S1?
The ListenPoint™ system has a 5 year warranty on core product that covers all manufacturing defects. Also all accessories have a 90 day warranty.