Listen EVERYWHERE 2 Channel Wi-Fi Audio Server (Dante)


The Listen EVERYWHERE LW-150P is an affordable way to deliver 2 Dante® audio channels to audiences of up to 1000 users. The rear panel Dante input allows for easy audio routing and management via Dante Controller® software. Simply connect to your existing Wi-Fi network and stream low latency audio directly to guest’s devices using the free mobile app, or by providing Wi-Fi Audio Receivers at your venue to meet ADA compliance. Cloud-based management allows for simple management of the server and listening devices, including supporting custom welcome message videos or logos, sliding banners, and more, all providing another point of contact with your clients and customers. Experience great quality audio and industry leading low latency audio at your venue with a Dante enabled 2 channel Wi-Fi Audio Server.

See Architectural & Engineering Specs

This product is available through authorized resellers.

Request Quote


  • One (1) LW-150P-02 Listen EVERYWHERE 2 Channel Wi-Fi Audio Server (Dante) w/Power Supply
  • Two (2) 1.83M (6 ft.) CAT6 Cables
  • One (1) Quick Start Guide


  • 2 channel Dante® input
  • Audio routing and management via Dante Controller® software
  • Uses existing wireless network (Wi-Fi)
  • Low latency (see demo video)
  • ADA compliant (with receivers and neck loops)
  • Stream audio to venue provided receivers and guest devices
  • 2 channels per server (stackable)
  • Up to 1000 users
  • Great quality and reliability
  • Simple to setup
  • Low power consumption
  • Heavy-duty chassis



Dante Audio InputRJ-45 input supports Dante Audio over IP
Sampling rate 48 kHz, bit depth 24
Maximum 100m (328') CAT5/6 cable length
*Stereo operation requires the use of both inputs
EthernetRJ-45 supports 10/100/1000 Mbps speed. Green LED flashes at 100 Mbps, Yellow LED flashes at 1000 Mbps.
USBType A 2.0 (female)

+Power Supply

ConnectorDC Barrel Connector
Input Voltage100-240 VAC, 50-60Hz
Output Voltage5 VDC
Current6.0 A
Power30 W
Configurations01= North American Plug B; 02= United Kingdom Plug G; 03= European Union Plug F; 04= Australia Plug I


IP AddressDHCP, Static, Reserved
Users1000 (per server)
Max Channels2 mono (1 stereo) - Multiple servers may be used to increase the number of channels.
WAP Support802.11n or better w/WMM enabled
Supported WAP Frequencies2.4 GHz & 5 GHz
Bandwidth Use125 kbps per user
Frequency Response20Hz – 20kHz ±1dB
Dynamic Range90 dB
Signal to Noise Ratio (SNR)78 dB typical (at nominal input levels)
Bit depth16 bits
Sampling Rate48 kHz
Channel SecurityAES-128-CBC
System Latency40 - 80 mS (60 mS average). This can vary per network and mobile device.
Total Harmonic Distortion (THD)<1%
App SupportiOS/Android
Cloud ServiceYes, cloud service is available for remote server maintenance/updates. Cloud service also supports customization of the Android and iOS mobile apps, such as app theme settings, welcome ads, sliding banners, channel logos, channel names, pdf documents, and offers.
Warranty2 years


Dimensions (H x W x D)45mm x 170mm x 117m (1.77in x 6.69in x 4.6in)
Weight.59 kg (1.3 lbs)
Shipping Weight1.6 kg (3.6 lbs)
Rack Space1/2 RU


Temperature - Operation-10 ºC (14 ºF) to +40 ºC (104 ºF)
Temperature - Storage-20 ºC (-4 ºF) to +50 ºC (122 ºF)
Relative Humidity0 to 95% relative humidity, non condensing


Regulatory StandardsUL, FCC, CE, KCC, UKCA
Specifications subject to change without notice



+Does a Listen EVERYWHERE system allow me to be ADA compliant?

Yes! But you will also need to provide Wi-Fi audio receivers as well as neck loops to meet requirements per the ADA. Check out our ADA calculator to ensure you have the proper quantity of each based on your venue size.

+What if I need more than two channels of Listen EVERYWHERE audio?

With a Listen EVERYWHERE system, you can add additional servers, and the mobile app and receivers will find all the channels. There is no limit to the number of channels you can have with Listen EVERYWHERE. The only limitation would be the network.

+What suggested network configurations are needed for the Listen EVERYWHERE server?

+Why are some channels not showing up in the app?

Your server may be set to Stereo channel configuration, which requires 2 merged channels to send left and right audio. Also, channels may have been disabled on your server. You can use the Listen EVERYWHERE Cloud Services to modify your channel configuration and gain access to all available channels. If you have never used cloud services before, you can request login credentials on the Listen EVERYWHERE Support page.