DCS 6000 4-Channel Analog Output Module
AO 6004

Highlights

  • Four (4) transformer balanced and ground lifted outputs.
  • Cost-effective structured Cat-5e cabling.
  • No local power required.

Overview

The AO 6004 Audio Output Unit outputs four (4) floor or language channels to IR language distribution systems, RF transmitters, recording and/or web-streaming devices. By default the channels 0-3 are selected but the audio properties and channels can be changed by the SW 6000 on a PC. The units can be easily daisy-chained in the DCS-LAN with shielded FTP or STP Cat-5e cables (sold separately). The AO 6004 can be free-standing, mounted in a 19" rack or into the CU 6005 expansion slot.

Includes

AO 6004 DCS 6000 4-Channel Analog Output Module
User Manual

Specifications

 SpecificationsAO 6004
AudioSystem Frequency Response20 Hz - 16kHz
THD at Nominal Level<0.05%
Cross Talk Attenuation 
Dynamic Range 
Signal-to-Noise Ratio>90 dBA
XLR OutputNominal 0 dBm
Load > 600 Ohm
Maximum +15 dBm
 
InterconnectionsDCS-LANTwo (2) shielded RJ45 ports, w/auto-termination
Audio OutputsFour (4) XLR transformer balanced, ground lifted balanced audio outputs
   
PowerPower Consumption2 W
   
PhysicalDimensions (H x W x D) (without brackets)1.50 x 7.09 x 4.72 in. (38 x 180 x 120 mm)
ColorBlack
Unit Weight1.9 lbs. (0.86 kg)
Shipping Weight3.0 lbs. (1.36 kg)
MountingFree-standing, mounted in a 19" rack or into the CU 6005 expansion slot
   
Specifications are subject to change without notice

Requirements

Used With

None

FAQ

How can I mount the AO 6004 4-Channel Analog Output Module?
The AO 6004 can be free-standing, mounted in a 19" rack or into the CU 6005 expansion slot. Note: the AO 6004 can NOT be mounted in a CU 6011.