DCS 6000 Delegate Unit w/Fixed Mic 15.8 in. (40 cm)
DM 6010 P

Highlights

  • Excellent sound quality.
  • Cost-effective structured Cat-5e cabling.
  • No pick-up of mechanical table noise thru proprietary double rubber band capsule suspension.
  • Remote microphone gain adjustment.
  • Elegant, unobtrusive, black units.

Overview

The DM 6010 P is a fully digital, portable delegate unit perfectly suited for permanent meeting rooms or temporary discussion-style meetings. The unit features a built-in loudspeaker and a fixed 15.8 in. (40 cm) gooseneck microphone with illuminated red ring to indicate microphone ON status.
 
Each unit enables participants to speak, register a request-to-speak and listen to other speakers. The unit can either be controlled by the microphone button or remotely by the operator/conference chair. The gain/sensitivity of the microphone/loudspeaker can be remotely controlled by the operator. The microphone button is surrounded with an LED to indicate whether the unit is on (RED) or in the request-to-speak queue (GREEN). The loudspeaker is automatically switched off to prevent acoustic feedback when the microphone is active. The units can be easily daisy chained with shielded FTP or STP Cat-5e cables (sold separately).

Specifications

 SpecificationsDM 6010 P
AudioLoudspeaker Frequency Response150 Hz – 15 kHz
Loudspeaker diameter3 in. (76 mm)
Loudspeaker maximum power3 W RMS
Microphone Frequency Response100 Hz – 15 kHz
Microphone Sensitivty -22 dBv/Pa
Microphone Max. SPL 125 dB (3% THD)
Microphone equivalent noiseApprox. 20 dB SPL
Microphone Front/Back ratio >20 dB (1 kHz)
   
Controls & IndicatorsMicrophone ButtonRed/Green illuminating LED; red indicates microphone is active, green indicates request-to-speak.
Illuminated Microphone RingRing around the microphone head that illuminates bright red when the microphone is on
   
InterconnectionsDCS-LANTwo (2) RJ45 ports, screened with auto-termination
   
PowerPower Consumption2.4 Watts
   
PhysicalDimensions (H x W x D)2.40 x 5.91 x 6.61 in. (61 x 150 x 168 mm)
Microphone length15.8 in. (40 cm)
ColorBlack
Unit Weight2.0 lbs. (0.9 kg)
Shipping Weight3.0 lbs (1.36 kg)
MountingTabletop (portable or semi-flush mounted)
   
Specifications are subject to change without notice

Requirements

Used With

None

FAQ

Do I need software to use the voting feature? 
Software is required to handle the voting, results, display etc.
 
How many microphone units can be connected to the CU? 
The total number of units that can be connected is based on cable length, type of CU and the type of unit being connected, but on each output of a CU 6010 you can typically get about 30 to 42 delegate/chairman units, or 20 to 30 flush mount units, or 16 Interpreter Sets. More units can be added with extension power supplies. Contact Listen Technical Support for more information.
 
How far can the daisy chain cabling go? 
200 meters without any repeaters. Up to 640 meters with repeaters and further when using optical cables. Contact Listen tech support for more information.
 
Can I mix and match different microphone styles with the system? 
Yes, all the DCS 6000 units with a loop through (all except the DT/IT) can be connected in parallel or serial configurations.
 
Is the cabling proprietary cabling?  
No, but it must be shielded Cat-5 (FTP /STP). Depending on the specification, higher shielded CAT cables can be used for extension cables as well.
 
Can I use a conference system without chairman unit?
Yes you can, however, there will not be any priority function available. The chairman will not be able to manage the microphone system.
 
How many microphones can be connected to the CU 6005? 50 without a license, 500 with a license and additional CUs.